EMOSAFE Network Isolators are used in copper-based network connections in private, public, and commercial sectors.
They protect connected equipment against extraneous voltage sources and overvoltage, which can arise from installation errors, aging components, or moisture at the network interface. They attenuate low-frequency signal components and thus protect connected equipment from ground loops and other problems. Overvoltages induced by lightning strike and switching processes can be inductively coupled into network lines. Such overvoltages can be restrained by Network Isolators.

EMOSAFE Network Isolators are primarily used in medical applications. They conform to the high requirements which IEC 60601-1 places upon galvanic isolation devices in the medical field.

Further information on EMOSAFE Network Isolators:

to top

Network Isolators

All EMOSAFE Network Isolators have a dielectric strength of at least 4 kV AC, and comply with the requirements of IEC 60601-1.

Installation Variants EN-10

Model	Data Sheet	Step File	Transmission Rate	Cable Outlet
EN-10H			10/100 Mb/s	horizontal
EN-10V			10/100 Mb/s	vertical
EN-10HG			10/100/1000 Mb/s	horizontal
EN-10VG			10/100/1000 Mb/s	vertical

 

Installation Variants EN-50

Model	Data Sheet	Step File	Transmission Rate	Cable Outlet
EN-50HG-Y			10/100/1000 Mb/s	Yamaichi coupling
EN-50HG-S			10/100/1000 Mb/s	horizontal
EN-50VG-S			10/100/1000 Mb/s	vertical

 

Installation Variants EN-60

Model	Product Information	Installation Guide	Step File	Transmission Rate	Lead Cable
EN-60KDS-020w				10/100/1000 Mb/s	200mm
EN-60KDS-C	EN-60KDS with customer-specified cable lead length. For Product Information, Installation Guide and Step-File, please refer to EN-60KDS-020w.			10/100/1000 Mb/s	Available cable lead lengths:

 

Casing Variants

Model	Data Sheet	Step File	Transmission Rate	Casing
EN-20G			10/100/1000 Mb/s	Plastic
EN-30			10/100/1000 Mb/s	Aluminium

 

Customer-specific Variants

We also offer custom designs according to your specifications.

Model	Transmission Rate	Special Features
R&M Safeline	10/100/1000 Mb/s	Suitable for wall outlet sockets of R&M module insert. Purchase only from R&M
Special types	10/100/1000 Mb/s	According to your specifications

 

We develop together with you the optimal design, construct all molds and tools necessary for the production, prepare product-accompanying documents, design the packaging and take care of the approvals you require.

Profit from our versatile experience in the field of product development!
Simply call us without obligation, we will be happy to advise you.

+49 . 30 . 4000 475 – 80

to top

Technology

EMOSAFE Network Isolators operate based on the principle of electromagnetic induction. Because of this transmission principle, Network Isolators do not require separate power supplies. There are no software drivers to be installed. Transmitter modules developed especially for our Network Isolators reach dielectric strengths of up to 6000 V AC and 8500 V DC (model dependent); and with a three-layer insulation system, conform to the highest safety requirements. At the same time they facilitate a particularly low-loss signal transfer, so that the usual maximum Ethernet network path length of 100 meters can be fully utilised in most cases without leading to a reduction in data throughput.

Further questions regarding the technology and the operation of Network Isolators are answered on our FAQ-Site.
Detailed information on individual products can be found in the product-related documents within the Network Isolators section.

to top

Scopes of Application

• Medical electrical devices whose operation is permitted only when existing signal interfaces present a standards-compliant means of separation. Hence the frequently used term “medical network isolator”.
• Sensitive measuring and monitoring devices in electrical testing laboratories, which are connected through an Ethernet network to a control centre, and need to be protected from transients and potential differences.
• Computer systems which are electrically connected over long distances via Ethernet cabling, where potential equalising currents need to be prevented.
• Audio applications, to reduce the transmission of low frequency alternating currents (AC hum) over the network connection.
• Applications where valuable or especially vulnerable devices need to be protected from overvoltage and line noise from peripheral network equipment.

nach oben

Quality

The development and production of our network isolators is certified according to ISO 9001:2008.
Before delivery EMOSAFE network isolators are subjected to an individual check, in which the electric strength of every single product is tested and documented.
To be able to ensure optimal transmission quality the EMOSAFE network isolators are also tested for observance of our high quality requirements with regard to the important characteristic values for the transmission properties, insertion loss, return loss and local crosstalk.

Do you have any other queries about EMOSAFE network isolators? Answers to the most frequently asked questions can be found in our FAQ.

We are happy to answer special questions personally, simply give us a call.

+49 . 30 . 4000 475 – 80

to top

Standard Conformity and Certificates

EMO Systems GmbH confirms the conformity with the requirements of the standards and directives to be applied, in particular IEC 60601-1-1, with a CE-declaration.
EMO Systems GmbH Declarations of Conformity
Based on the approval by the UL (Underwriters Laboratories Inc.) as Recognized Component E249126, our EMOSAFE network isolators are also suitable for use in the US-American market.
In the framework of the UL-approval test our network isolators are examined for conformity with the IEC 60601-1-1.
UL Certificate for EMOSAFE Network Isolators
EMO Systems GmbH is also certified according to DIN EN ISO 9001:2008 by the TÜV SÜD.
Our own developments and those contracted, the production as well as sales and service are therefore subjected to a tested quality management system.

TÜV Certificate of EMO Systems GmbH